A part of our paramotor canopies are tested in flight according to EN 926-2 norm, originally developed to assess free-flying paragliders. Unfortunately those tests are not the best tool to judge dedicated paramotor canopies, and that's why for several years there were attempts to develop separate paramotor tests and norms. A year ago (end of 2011 and March 2012) two new test procedures emerged -  French DGAC and actualised LTF (German). Recently most of our paramotor gliders are tested according to DGAC procedures.


DGAC certificate is based on flight test and internal paramotor flight tests. Main points to be controlled under maximum load in defined weather conditions are:

  • inflating the canopy

  • launch characteristics

  • speed parameters in level flight

  • canopy behaviour while entering hard (dynamic) turn

  • longitudinal stability while steering in accelerated flight

  • longitudinal stability while exiting accelerated flight

  • landing characteristics

Sensible testing procedures and fair job that is being done by certificating bodies fuels trust that many manufacturers place in DGAC standard. It is compulsory in France and regarded as reliable in ever growing number of countries.

LTF 23/05

Tests standard as agreed in March 2012 between EAPR, DULV and PMA. The agreement and test criterias in German are to be found here (and here is English translation).

Difficulties in working out a common position between these bodies (which are often negating each other certificates) means that manufacturers do not know what is exactly expected ot them. Until this is not cleared, it won't be a popular standard on other markets than Germany.



Most of our paragliders are tested according to new European Norm (EN) regulations

  • Flight test - EN 926-2:2005

  • Load test - EN 926-1:1995

Earlier we have been certifying our wings within AFNOR scheme.

Below you will find a table roughly comparing ranges of specific tests.

German paragliding market is regulated by LTF norms (former DHV). In fact they are very similar to the EN norm, with just some minor differencies. Since 2010 LTF is using the same categories as EN does (A, B, C etc.)
Both organisations are working towards full unification of EN and LTF tests.

The European norm is focused on the least experienced pilots - in their case maximum safety must be guaranteed, while the more seasoned can take care of themselves. That's why the initial classes are very tight, and even slight deviations from directional or vertical axis in specific manoeuvres can disqualify the wing. In case of higher classes there is fast increase in tolerance limits.

Full test schedule results in thorough description of given paraglider's behaviour in specific manoeuvres, each tried both at minimum and maximum weight (in free flight).

In case of each our paraglider you will find details of its certification along technical datas. Authenticity of certifications can be verified at www.para-test.com.

Certificate name, category and number are given on the rating plate (wingtip).

On the wing there may be present a different sticker as well, confirming new European certificate, with detailed results in its bottom line.

Below you will find a brief outline of EN paraglider categories with flight test details.



flight characteristics

pilot skills required


Paragliders with maximum passive safety and exceptionally forgiving flight characteristics. Very resistant to any deviations from normal state of flight.

Designed for all pilots, including all levels of training.


Paragliders with good passive safety and forgiving flight characteristics. Partly resistant to deviations from normal state of flight.

Designed for all pilots, including all levels of training.


Paragliders with moderate passive safety and possibly dynamic reactions to turbulence and/or pilot mistakes. Return to normal state of flight may require precise pilot input.

Designed for pilots who know principles of active steering and fly regularly, understanding consequences of using a wing with decreased passive safety.


Paragliders with demanding flight characteristics and possible abrupt reactions to turbulence and/or pilot mistakes. Return to normal state of flight requires precise pilot actions.

Designed for pilots flying very actively with considerable experience in turbulences, who understand and accept risk inherent in flying such paragliders.


Flight test report (as described in European Norm 929-2) gives account of 24 manoeuvres. Each of them is ranked as A, B, C, D or F (Failure). There is no percentages here, a paraglider gets as its overall result the lowest mark it obtained at any point. Even a single failure means that a paraglider did not pass at all, i.e. is not conforming to the norm. During flight tests following elements are assessed:

  • 1 - inflation/take-off

  • 2 - landing

  • 3 - speed in straight flight

  • 4 - steering forces and range

  • 5 - pitch stability when exiting accelerated flight

  • 6 - pitch stability using controls while in accelerated flight (any collapses?)

  • 7 - roll stability and damping

  • 8 - stability in gentle spirals and recovery

  • 9 - behaviour in a steeply banked turn (sink rate after two revs)

  • 10 - symmetric front collapse

  • 11 - exiting deep stall (parachutal stall)

  • 12 - recovery from high angle of attack

  • 13 - recovery from a developed full stall

  • 14 - asymmetric collapse

  • 15 - directional control during maintained asymmetric collapse

  • 16 - tendency to spin at trim speed

  • 17 - tendency to spin at low speed

  • 18 - recovery from a developed spin

  • 19 - B-line stall and recovery

  • 20 - big ears: entering, steering, exiting

  • 21 - big ears in accelerated flight (entering, steering, exiting)

  • 22 - behaviour on exit from a steep spiral

  • 23 - alternative means of directional control

  • 24 - any other flight procedure and/or configuration described in the users manual